13802284723
Chinese
service@poce-cert.com
Tel:86-755-29113252
Fax:86-755-29113135
Service@poce-cert.com
1F,Bldg.H, Hongfa Science and Technology park, Tangtou, Shiyan, Bao’an District, Shenzhen,China.
Introduction to CB certification
The International Electrotechnical Commission qualified electrician product testing and certification organization (IECEE) certification authority (CB) is a system of electrical products (including electrical and electronic equipment, devices and components) standard product safety system safety test report and certificate of mutual recognition of the first truly international system of.CB system based on the international recognition, and the use of CB test laboratory (CBTL) global network.CB test lab is responsible for product testing, which is in accordance with the relevant technical standards. The test results must be submitted to the CB system of each member of the national certification authority (NCB), the national certification institutions authorized by the CB testing laboratory testing products legally enter the market, without any other test.
Key steps in CB system
The manufacturer submits a product sample to the CB test lab to test whether it meets specific IEC standards and is consistent with any technical requirements in the IEC standard applicable to the certification country
Perform product testing CB testing laboratory, to assess whether the product meets the technical requirements. If the product meets all technical requirements, CB testing laboratory will be issued CB certification test report and test for related products manufacturers.
Then the sample submitted by the manufacturer, CB test report and test certification to the national certification of the relevant countries, so as to obtain national certification. This certification that the product meets the national technical standards, to obtain legal permission to enter the market.
CB certification data preparation
1. product manual
2. safety design files (including key structural drawings, which reflect the distance of the climb, the clearance, the number of insulation layers and the thickness)
3. product technical conditions (or enterprise standards)
4. product electric schematic
5. product line diagram
6. list of key components or raw materials (please select products with European certification mark)
7. of the components or photocopy of certification.
8. other required information
CB system certification scope:
Battery IEC standard and range:
IEC 60086 - primary battery
IEC 60095- starter lead-acid batteries
IEC 60622- two batteries and batteries with base or other non acid electrolyte - square sealed rechargeable nickel cadmium cell
IEC 60623- two batteries and batteries with base or other non acid electrolyte - Open rechargeable nickel cadmium cell
IEC 60896- fixed lead acid battery
IEC 61960- two batteries and batteries with base or other non acid electrolytes - Portable two lithium batteries and batteries
IEC 62133 - alkaline and other non acid electrolyte two cell and cell packs - Portable sealed two cell and portable sealed two battery safety requirements
IEC 62259- two batteries and batteries with base or other non acid electrolyte - Open rechargeable nickel cadmium cell
IEC 62281 - Safety of primary and secondary lithium batteries and batteries in transit two
IEC standards and ranges for audio, video, and similar electronic devices:
IEC 60065 - audio, video, and similar electronic devices
Mechanical safety of IEC 61965- cathode ray tubes
IEC standard and range of household electrical appliances:
IEC 60204- mechanical and electrical equipment
IEC 60335- home appliances
Information technology equipment IEC standards and scope:
IEC 60950 - it equipment
IEC 62040 - uninterruptible power supply system (UPS)
IEC standard and range of lighting products:
Glow starter for IEC 60155- fluorescent lamp
IEC 60570- lighting supply rail system
IEC 60598- lighting products
General and safety requirements for ballasts for IEC 60920- tubular fluorescent lamps
Performance requirements for ballasts for IEC 60921- tubular fluorescent lamps
Accessories for IEC 60922- lamps - General requirements and safety requirements for ballasts for gas discharge lamps (except for tubular fluorescent lamps)
Accessories for IEC 60923- lamps - Ballasts for gas discharge lamps - other than tubular fluorescent lamps - Performance requirements
Accessories for IEC 60926- lamps - starting devices (except for glow starter)
Accessories for IEC 60928- lamps -- AC power supply ballasts for tubular fluorescent lamps
Performance requirements for AC or DC power supply control devices for IEC 60929- tubular fluorescent lamps
IEC 60968- safety requirements for self ballasted lamps used in general lighting services
IEC 60969- performance requirements for self ballasted lamps used in general lighting services
DC or AC power down converter for IEC 61046- incandescent lamps
IEC 61347- lamp control gear
IEC 62031- general lighting equipment LED module
The biosafety of IEC 62471- luminaires and luminaire systems
IEC 62560- self ballasted light for general lighting service > 50 V
Measuring equipment IEC standards and scope:
IEC 61010 - electrical equipment for measurement, control and laboratory use
IEC standard and range of medical instruments:
IEC 60601 - Medical electrical equipment for more
IEC 62304 - medical device software for more
Power supply device IEC standard and range:
IEC 61558 - power supply unit
Tools, IEC standards and scope:
IEC 60745- portable power operated tools
IEC 61029- mobile power operated tools
Your earnings:
Time saving and cost reduction - to identify compliance considerations as early as possible during the product development phase;
Minimize risk - avoid supply chain problems that could lead to product recalls and reputational damage;
Gain competitive advantage - ensure consistent quality and safety of the product without affecting the time to market;
Benefit from the full solution - using our full suite of testing, certification and inspection services
Friendly Link:
